ZTE AXON A1R FRP Remove Tool | Dev-Time

ZTE AXON A1R
                        ZTE AXON A1R FRP Removal 

Unlock FRP A1R
 ZTE AXON A1R FRP Remove Tool One click Without Box
Free Download For All By Dev-Time
FRP Remove Tool In FTM + EDL Mode With
Firehose Protocol For Unbrick And Flash Firmware


ZTE AXON A1R FRP

REMOVE FRP AXON A1R
Bypass FRP AXON A1R



How To Remove FRP For ZTE AXON A1R
  1. Download : ZTE AXON A1R FRP Remove Tool
  1. Turn Off  The Phone 
  1. Press Volume UP + Power Button For ENTER To (FTM Mode)
  1. Connect Phone With USB Cable
  1. Run FRP Remove Tool
  1. Wait For Phone Connect And Auto Switch To EDL Mode
  1. The Phone Is Direct Connect With Tool And Remove FRP 
  1. if  FRP Remove Tool Appened (Erase FRP Done) Then Disconnect Phone And Reboot 




Log
# Device Info
ZTE Axon
Model Number: A1R
(Press Volume UP + Power For Enter To FTM Mode)cls
|
Waiting for 0 seconds, press a key to continue ...
[*] Protocol 8x10.mbn
[*] Wait For QDLoader 9008
[*] Phone Found COM12
[*] Erase FRP Partition
[*] Erase FRP Done
Press any key to continue . . .






 ------------------------------------------------------------------------------------------------------------

How To Enter To EDL Mode  




 FTM Method :  turning off the phone and then pressing the volume up key + the power key and the                                                        phone will enter the FTM mode and use the command
EDL Cable Method : Bring a cable USB cable Then reveal the wires and connect (D+ with GND) As shown in the picture 








------------------------------------------------------------------------------------------------------------


You can use the fire hose coil supplied with each model for 

Read \ Write \ erase Partitions using emmcdl commands 

Read

emmcdl  -p COM12  -f  prog_emmc_firehose_***.mbn  -d  modem  -o  modem.bin



Write

emmcdl  -p  COM12  -f  prog_emmc_firehose_***.mbn  -b  modem  modem.bin 



erase

emmcdl  -p  COM12  -f  prog_emmc_firehose_***.mbn  -e  modem 


emmcdl.exe


EMMCDL More Commands 

Examples: emmcdl -p COM8 -info
 emmcdl -p COM8 -gpt
 emmcdl -p COM8 -SkipWrite -SkipStorageInit -MemoryName ufs -f prog_emmc_firehose_8994_lite.mbn -x memory_configure.xml
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -x rawprogram0.xml -SetActivePartition 0
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -ffu wp8.ffu
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d 0 1000 -o dump_1_1000.bin
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -d SVRawDump -o svrawdump.bin
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -b SBL1 c:\temp\sbl1.mbn
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e 0 100
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -e MODEM_FSG
 emmcdl -p COM8 -f prog_emmc_firehose_8994_lite.mbn -raw 0x75 0x25 0x10



 



Post a Comment

Previous Post Next Post